UMTv2 / UMTPro UltimateMTK2 v3.9 Update – Motorola Fastboot Advance BL Unlock (Method 2) | Full Supported Model List

[VaultManager]

​

UMTv2 / UMTPro — UltimateMTK2 v3.9
Motorola Fastboot Advance Method (Method 2)
The Ultimate MediaTek Tool
Release Date: 15 October 2026​

---

UMT has rolled out UltimateMTK2 v3.9 for UMTv2 and UMTPro, headlined by a brand-new Motorola Fastboot Bootloader Unlock — Method 2, broader Infinix META support, and an extensively updated Motorola model database for both unlock methods.

What's New

Added: Motorola Fastboot BL Unlock Method 2

• Direct unlock — no Fastboot command required
• No data wipe (wipe manually only if needed)
• Allows erase of any partition in Fastboot
• Supports more devices than Method 1
• Manual option to select your own LK image

Updated: Infinix BL Unlock in META

• Added support for more LK variants
• Added verification of unlock data

Method 1 — Updated Models (24)

• XT2139-1 (KYOTO) — TELEU_13_T2RKS33.146-14-1-3
• XT2139-2 (KYOTO) — RETAIL_T2RK33.146-14-1
• XT2165DL (TONGA) — TRAC_12_S3RQS32.20-42-10-6-10-5
• XT2205-1 (TESLA) — TMO_15_V1STS35H.71-19-4
• XT2211DL (MILAN_G) — TRAC_11_RRDE31.Q3-73-22
• XT2255-2 (VICKY) — RETIN_13_T2SVS33.68-21-10-17
• XT2303-1 (LYRIQ) — RETAPAC_TW_15_V1TLS35.73-60-3-6
• XT2303-2 (LYRIQ_G) — V1TLS35.73-60-3-8
• XT2305-1-DS (AION) — AION_G_13_SYS_T2TT33.60-27
• XT2307-2 (MANAUS) — RETIN_15_V1TMS35H.3-45-3-2-3
• XT2317DL (GNEVAN) — TRAC_14_U1THS34.65-74-1-7-14
• XT2343-5 (CANCUNF) — RETIN_15_V1TDS35H.83-20-5-12
• XT2409-3 (VIENNA) — RETIN_16_W1UIS36H.39-25-8
• XT2431-1 (CANCUNF) — RETIN_15_V1TDS35H.83-20-5-7
• XT2435-3 (TAIPEI) — CMCC_15_V1UTC35H.45-32-8
• XT2453-1 (AITO_G) — RETIN_SYS_W1UCS36H.96-24-4-6
• XT2503-2 (SCOUT) — RETIN_16_W1VC36H.14-20-1
• XT2503-2 (SCOUT) — RETIN_16_W1VC36H.14-20-12
• XT2505-2 (SCOUT) — RETIN_15_V2VC35.33-93-4
• XT2507-2 (CYBERT) — RETIN_16_W1VVS36H.7-21-5-1
• XT2513V (KANSAS) — TRACFONE_15_V1VK35.22-37-2-4
• XT2519-1 (OULU) — TMO_15_V2VD35.63-26-5
• XT2527-5 (NICE) — RETIN_16_W1VN36H.60-30
• XT2625-6 (SYDNYL_G) — W3WZ36.54-93-2-9b32e

Method 2 — Updated Models (31)

• XT2139-1 (KYOTO) — TELEU_13_T2RKS33.146-14-1-3
• XT2139-2 (KYOTO) — RETAIL_T2RK33.146-14-1
• XT2165DL (TONGA) — TRAC_12_S3RQS32.20-42-10-6-10-5
• XT2205-1 (TESLA) — TMO_15_V1STS35H.71-19-4
• XT2211DL (MILAN_G) — TRAC_11_RRDE31.Q3-73-22
• XT2255-2 (VICKY) — RETIN_13_T2SVS33.68-21-10-17
• XT2303-1 (LYRIQ) — RETAPAC_TW_15_V1TLS35.73-60-3-6
• XT2303-2 (LYRIQ_G) — V1TLS35.73-60-3-8
• XT2305-1-DS (AION) — AION_G_13_SYS_T2TT33.60-27
• XT2307-2 (MANAUS) — RETIN_15_V1TMS35H.3-45-3-2-3
• XT2317DL (GNEVAN) — TRAC_14_U1THS34.65-74-1-7-14
• XT2333-5 (PENANGF) — RETAIL_14_UHA34.29-44
• XT2343-5 (CANCUNF) — RETIN_15_V1TDS35H.83-20-5-12
• XT2409-3 (VIENNA) — RETIN_16_W1UIS36H.39-25-8
• XT2425-2 (FOGOROW) — RETIN_14_UTAS34.82-97-3_82-97-3
• XT2431-1 (CANCUNF) — RETIN_15_V1TDS35H.83-20-5-7
• XT2435-3 (TAIPEI) — CMCC_15_V1UTC35H.45-32-8
• XT2453-1 (AITO_G) — RETIN_SYS_W1UCS36H.96-24-4-6
• XT2503-2 (SCOUT) — RETIN_16_W1VC36H.14-20-1
• XT2503-2 (SCOUT) — RETIN_16_W1VC36H.14-20-12
• XT2505-2 (SCOUT) — RETIN_15_V2VC35.33-93-4
• XT2507-2 (CYBERT) — RETIN_16_W1VVS36H.7-21-5-1
• XT2513V (KANSAS) — TRACFONE_15_V1VK35.22-37-2-4
• XT2519-1 (OULU) — TMO_15_V2VD35.63-26-5
• XT2521-4 (LAMU_G) — 15_VVTAS35.51-137-2-1
• XT2523-11 (LAMU_G) — 15_VVTA35.51-153
• XT2523-2 (LAMU_G) — 15_VVTA35.51-137
• XT2523-4 (LAMU_G) — 15_VVTA35.51-158
• XT2527-5 (NICE) — RETIN_16_W1VN36H.60-30
• XT2535-13 (LAGOS_G) — 15_VVOB35.78-158_686e77
• XT2625-6 (SYDNYL_G) — W3WZ36.54-93-2-9b32e

Important Notes

• You can flash the device using both BROM and Preloader mode.
• If the default DA does not work, use your own DA in Custom DA.
• Force BROM may not work on new-security devices — use Test Point instead.
• When using Test Point, you must select Preloader in PL (not needed when flashing).
• To connect a device in Preloader mode, select PRELOADER in connection settings; otherwise the software will try to Crash Preloader (may not work on new-security devices).
• Some features are device/OS-specific and may not work on all devices.

How to Download / Update

1. Download and run UMT Support Access.
2. Connect your UMT Box / Dongle to the PC.
3. Download the required executable from the Installer folder.
4. Use UMT Card Manager (via Support Access) to update Card Counter / Firmware or activate the Add-on.

Download Mirrors: http://ultimatemultitool.com/mrrs

---

Disclaimer: IMEI / ESN / MEID repair is intended to restore the original identifier printed on the device label/box only. We do not endorse or encourage changing IMEI/ESN/MEID — it is illegal. The user is solely responsible for any illegal use of these features. Credits: Asad Software, Shensohau, and all testers. All trademarks belong to their respective owners.